椎間孔鏡轉鏡破碎是比較常見的問題，主要是因為手術過程中使用不當或者保養不當所造成的。以下是內窺鏡維修公司給出的相關維修和預防的建議：

The breakage of intervertebral foramen mirror rotation is a common problem, mainly caused by improper use or maintenance during the surgical process. The following are the suggestions for maintenance and prevention provided by the endoscope maintenance company:

一般的修理流程如下：

The general repair process is as follows:

1.檢查轉鏡損壞程度，確定是否需要更換。

1. Check the degree of damage to the rotating mirror to determine if it needs to be replaced.

2.如需要更換，在備件清單中選擇合適的轉鏡備件。

If replacement is necessary, select the appropriate spare parts for the rotating mirror in the spare parts list.

3.拆卸老化或損壞的轉鏡，更換新的轉鏡，按照規定的程序安裝回原位。

3. Disassemble the aged or damaged rotating mirror, replace it with a new one, and install it back in place according to the prescribed procedure.

4.完成更換后，進行全面的測試和校準，確保轉鏡的工作性能和手術效果與之前一致。

After completing the replacement, conduct comprehensive testing and calibration to ensure that the working performance and surgical effect of the rotating mirror are consistent with before.

5.根據修理結果進行記錄和報告，保留相應的維護記錄。

5. Record and report the repair results, and keep corresponding maintenance records.

注意：

be careful:

需要選擇專業的醫療設備維修公司進行維修，不要自行拆卸和修復。

It is necessary to choose a professional medical equipment maintenance company for maintenance, and do not dismantle or repair it on your own.

維修前要對椎間孔鏡進行全面的檢測，確定轉鏡破碎是否是唯一的問題。

Before maintenance, a comprehensive inspection of the intervertebral foramen mirror should be conducted to determine whether the breakage of the rotating mirror is the only problem.

維修公司需要更換破碎的轉鏡，并確保新的轉鏡符合原有的規格和要求。

The repair company needs to replace the broken rotating mirror and ensure that the new rotating mirror meets the original specifications and requirements.

維修后需要進行全面的測試和校準，確保轉鏡的工作性能和手術效果與之前一致。

After maintenance, comprehensive testing and calibration are required to ensure that the working performance and surgical effect of the rotating mirror are consistent with before.

在手術過程中，應該注意操作規范和技巧，并避免使用過大的力量和不合適的角度。手術后應該及時清洗和消毒椎間孔鏡，并妥善保管，避免碰撞和摔落等意外情況。定期進行檢查和維護，包括對椎間孔鏡和轉鏡進行全面的清洗、檢測和校準等。使用專業的保養和維護工具，保證椎間孔鏡和轉鏡的使用壽命和性能。更多相關事項就來我們網站http://tukouzhao.cn咨詢吧！

During the surgical process, attention should be paid to operational norms and techniques, and excessive force and inappropriate angles should be avoided. After surgery, the intervertebral foramen mirror should be cleaned and disinfected in a timely manner, and properly stored to avoid accidental situations such as collisions and falls. Regular inspection and maintenance, including comprehensive cleaning, testing, and calibration of the intervertebral foramen mirror and rotating mirror. Use professional maintenance and upkeep tools to ensure the service life and performance of the intervertebral foramen mirror and rotating mirror. For more related matters, come to our website http://tukouzhao.cn Consult!