As for the endoscope, the internal quality factors may include some chemical components and some eye defects, which affect the use quality, including some welding function and operation function. Beside the use process, the endoscope includes the quality inspection of some casting raw materials, the non-destructive testing of castings, and the surface quality inspection of castings Test, beside the whole process of quality inspection, we can complete the analysis of some materials in various aspects in a relatively short time.
During the maintenance of endoscope equipment, the commonly used equipment is some flaw detection or radiographic inspection, etc. because the surface finish is relatively poor, the wood will be loose. At this time, we need to pay special attention to the selection of some flaw detection methods, including the shape of some instruments, and some operation techniques and personnel And so on. The inspection of casting surface defects must not be observed with naked eyes, so when using this kind of endoscope, we can better observe some defects on the surface, and the relevant detection will become more accurate. At this time, we need to quickly find the problem, and then solve the problem in time.
In the process of detection, the requirements for the environment of this kind of endoscope are not particularly high. It only needs to ensure that there is no strong electromagnetic interference or violent voltage fluctuation around the detection area. Otherwise, it will have a very bad impact on the detection equipment, and for the humidity and temperature of the environment, it should also appropriately meet the requirements of the use of the equipment Only in this way can we ensure that the endoscope will not cause certain damage during the use process, because if the temperature is too high, there is no way to let the equipment get a good heat dissipation.
If the light is too bright, it will directly reduce the resolution of the human eye, and also affect the contrast of the monitoring image. In general, when detecting, it is not allowed to carry out in some strong light, such as some direct sunlight. Therefore, we should choose some indoor environment with soft light and relatively quiet, because this is the only way to carry out detection When using endoscope, it can bring a good effect. As a non-destructive testing tool, endoscope itself has been widely used in various fields, including some thermal power plants, some nuclear power plants, some turbines, or generators, which can bring a good use, and then carry out relevant inspection At the same time, it is also better to facilitate some staff.
The above is the endoscope equipment maintenance company's introduction of "endoscope in casting product industry can play a role", I believe you have understood, if you want to know more about endoscope knowledge, please pay attention to our website.